Kitchen Remodel Cost by Size (2026): What Changes Between a 10x10, a 12x12, and a Large Kitchen

Ask three contractors what a kitchen remodel costs and you will get three numbers that barely resemble each other. One reason is size. A bigger kitchen does not just cost more overall. It changes which parts of the budget grow and which stay flat, and knowing the difference helps you read bids properly.

Rebuilt Kitchen Pros lists 198 active kitchen remodelers. None of them can price your kitchen from its dimensions alone, and this guide will not pretend otherwise. What size does tell you is where the money scales, so you can compare bids line by line instead of comparing totals that hide different scopes.

The short answer

Size drives the quantity lines: linear feet of cabinets, square feet of countertop, square feet of flooring, and feet of backsplash tile. Size barely moves the fixed lines: permits, design, a standard appliance package, and the plumber's trip to move one sink. So a kitchen twice as large rarely costs twice as much. It costs more on materials and installation labor for the quantity lines, and about the same on everything else, unless the bigger room also tempts a layout change. Layout changes, not square feet, are what make budgets jump.

How the quantity lines scale

Measure three things before you talk to anyone. These measurements take ten minutes and they are the same ones a contractor will take.

Measurement How to get it What it drives
Cabinet run length Measure each wall where cabinets sit, in feet, base and upper runs separately Cabinet boxes, doors, hardware, and install labor
Countertop area Run length in inches times counter depth (about 25.5 inches), divided by 144 Stone or laminate material, templating, and fabrication
Floor area Room length times width, minus nothing; flooring runs under most cabinets in a full remodel Flooring material and install, plus demo and disposal

Worked example, labeled as math and not a price: a 10x10 kitchen with cabinets along two walls might have about 17 feet of base cabinet run. At standard depth that is roughly 36 square feet of countertop before cutouts. A 12x12 kitchen fitted the same way might carry about 21 feet of run and roughly 45 square feet of counter. The countertop line grows by about a quarter. The permit line does not grow at all.

Small kitchens and galleys (under 100 square feet)

Small kitchens concentrate the fixed costs. Permits, design time, and trade minimums land on fewer square feet, so the cost per square foot often looks high even when the total is the lowest of any size band. The savings are real but specific: short cabinet runs, one short countertop slab or a laminate surface, and flooring quantities a single pallet can cover. The trap in small kitchens is storage. Money spent on drawer bases, pull-outs, and tall cabinets buys function that a bigger kitchen gets from raw space, and those upgrades are priced per cabinet, not per square foot.

The 10x10 kitchen (100 square feet)

The 10x10 is the size the industry uses as its reference kitchen, which is why so many cost quotes are framed around it. Treat any 10x10 package price as a starting scope, not a quote for your home. In a 10x10 with the layout unchanged, the budget is mostly cabinets and counters. Move the sink or the range and the same 100 square feet picks up plumbing, electrical, and venting work that has nothing to do with size. When you compare two bids on a 10x10, compare the cabinet construction, the countertop material, and whether layout work is included. Those three lines explain most of the spread.

Medium kitchens (100 to 200 square feet)

This is the band where islands appear. An island adds a cabinet run, a second countertop piece, and often electrical work for outlets and lighting, so it grows both the quantity lines and the trade lines at once. Medium kitchens also fit a full-height pantry or a second oven, and each appliance added is a fixed cost that size made possible rather than a cost size caused. If a bid for a medium kitchen looks high, ask which lines are quantity and which are additions. The answer tells you what to cut if the number needs to come down.

Large and open kitchens (over 200 square feet)

Past 200 square feet, the room usually stops being only a kitchen. Sight lines into living space raise the finish standard: cabinet doors have to look good from across the room, lighting becomes layered, and flooring has to match or transition into the next space. The quantity lines keep scaling, but the real budget driver at this size is specification level. Two 250 square foot kitchens can differ by more than the entire cost of a small kitchen remodel, purely on cabinet construction, stone choice, and appliance tier. At this size, get the scope in writing before you get the price, and use the scope levels in our Kitchen Renovation Cost (2026): Calculator and Scope-Based Budget guide to keep bids comparable.

What size does not change

  • Permits and inspections are set by the work type and your city, not by square footage.
  • A standard appliance package costs the same in a 10x10 as in a 12x12.
  • Design and measurement time grows slowly with size.
  • Demo and disposal grow with quantity, but the haul-away trip itself is a fixed line.

Getting a bid that is actually based on your size

  1. Take the three measurements in the table above, plus ceiling height.
  2. Write down what stays and what moves: sink, range, walls, windows.
  3. Pick the selections that drive the quantity lines: cabinet construction, countertop material, flooring type.
  4. Ask at least three remodelers for line-item bids on the same scope. The directory's city pages are a practical starting point; Plano, Austin, and Houston have the deepest benches, with 13, 12, and 10 listed remodelers respectively.
  5. Compare line by line. A lower total built on thinner cabinets is not a saving; it is a different kitchen.

Start with the remodelers listed at Rebuilt Kitchen Pros and bring your measurements to the first call. A contractor who prices from your actual runs and areas is giving you a bid. One who prices from a national average is giving you a brochure.

Frequently asked questions

Why does a kitchen twice as large rarely cost twice as much?

Size drives the quantity lines, such as cabinets, countertop, and flooring, while fixed lines like permits, design, and a standard appliance package barely move. A bigger kitchen costs more on materials and installation labor, and about the same on everything else, unless it also tempts a layout change.

What three measurements should you take before talking to a contractor?

Measure cabinet run length, countertop area, and floor area. Countertop area is the run length in inches times the counter depth of about 25.5 inches, divided by 144.

Why do small kitchens often look expensive per square foot?

Small kitchens concentrate the fixed costs, so permits, design time, and trade minimums land on fewer square feet. The cost per square foot often looks high even when the total is the lowest of any size band.

What does adding an island do to a medium kitchen budget?

An island adds a cabinet run, a second countertop piece, and often electrical work for outlets and lighting. It grows both the quantity lines and the trade lines at once.

How should you compare bids for a kitchen of your size?

Ask at least three remodelers for line item bids on the same scope and compare line by line. A lower total built on thinner cabinets is not a saving; it is a different kitchen.

Enjoyed this article?

Share it with your network