Kitchen Remodel Permit Cost by City: Austin, Plano, Dallas, Houston, and Phoenix (2026)
A kitchen remodel permit costs about $230 to $280 in Plano, about $340 and up in Dallas, about $400 and up in Houston, about $1,010 in Phoenix, and about $1,050 to $1,290 in Austin, based on each city's own published fee schedule applied to a typical kitchen project. No city on this list charges one flat kitchen permit price. Austin prices plan review by square foot and then charges separate building and trade fees. Plano prices residential alterations by the square foot. Dallas and Phoenix price by project valuation. Houston prices residential work by square foot and construction type, with a flat administrative fee on every permit. This page covers fees only. For which permits a kitchen remodel needs and how the approval process runs, see our kitchen remodel permits guide.
Every figure below comes from a city fee schedule read in full for this page, with the schedule date named next to the city. Where a city publishes a formula instead of a kitchen price, this page shows the formula and one worked example, and says plainly that the city sets the final fee at intake. Fees change on each city's own cycle, so confirm the current schedule with the permit office before you budget around a number here.
How do the five cities compare on kitchen permit fees?
| City | Fee basis | Worked example for a typical kitchen | Schedule read for this page |
|---|---|---|---|
| Austin, TX | Plan review by square foot, plus separate building and trade fees | About $1,050 to $1,290 | City of Austin homeowner permitting fees, FY2026, posted August 11, 2025 |
| Plano, TX | $0.48 per square foot for residential alterations, plus flat plan review and trade minimums | About $231 to $276 for a 200 square foot kitchen | City of Plano fee schedule ordinance, passed November 10, 2025, effective January 2, 2026 |
| Dallas, TX | Project valuation under Table B-1, with a $175 minimum permit fee | About $336 on a $25,000 kitchen, before trade inspection minimums | City of Dallas Ordinance 33080, effective July 1, 2025 |
| Houston, TX | Square foot and construction type for residential work, plus a $33.56 administrative fee per permit | About $403 for a kitchen remodel on the city's schedule data | City of Houston 2026 Building Code Enforcement Permit Fee Schedule, effective January 1, 2026 |
| Phoenix, AZ | Project valuation under Table A, plus plan review at 100 percent of the permit fee at or under $50,000 | About $1,006 on a $30,000 kitchen | City of Phoenix PDD fee schedule, approved December 17, 2025, effective January 20, 2026 |
The spread is real, and it comes from structure, not from one city being careless with numbers. Phoenix doubles its permit fee with a full plan review charge on residential projects valued at $50,000 or less. Austin stacks a plan review fee, an application processing fee, a building fee, and separate trade fees. Plano and Dallas keep residential remodel fees low by pricing on square footage or a small valuation multiplier. Houston sits in the middle, with modest per permit charges that add up across the building, electrical, and plumbing permits a kitchen usually needs.
How much does a kitchen remodel permit cost in Austin?
Austin is the most expensive city on this list for a kitchen permit, and the reason is the stack. The City of Austin's homeowner permitting fee document, posted August 11, 2025 for fiscal year 2026, prices an interior remodel in separate pieces. Plan review is charged by the size of the remodel area: about $213 for up to 100 square feet, about $214 for 101 to 200 square feet, about $343 for 201 to 300 square feet, about $452 for 301 to 400 square feet, about $551 for 401 to 500 square feet, and about $644 at 501 square feet and above. A residential plan review application processing fee of $136.45 applies on top.
At permit issuance, Austin charges separate fees per trade. The same city document lists common residential fees of $334.74 for the building fee, $166.99 for the electric fee, $146.87 for the mechanical fee, $200.43 for the plumbing fee, and $86.06 for the energy fee. A 200 square foot kitchen that touches electrical and plumbing work therefore stacks up to roughly $1,050 with plan review, processing, building, electric, and plumbing fees, and roughly $1,290 if mechanical and energy fees also apply. Your contractor's exact stack depends on which trades the scope touches. Austin also charges extra when a remodel adds square footage or needs an electric panel upgrade, including a $200 Austin Energy service planning application fee in each of those cases.
One timing point matters in Austin: plan review fees are due at application and the permit fees are due at issuance, so the cost lands in two payments, not one. Homeowners comparing local bids can pair this page with our guide to the best kitchen remodelers in Austin.
How much does a kitchen remodel permit cost in Plano?
Plano is the cheapest city on this list, because it prices residential alterations by the square foot at a low rate. The City of Plano Building Inspections fee schedule, adopted by ordinance passed November 10, 2025 and effective January 2, 2026, charges $0.48 per square foot for a residential addition, alteration, or backyard cottage, with a $40 minimum fee. Plan review adds a flat $45. Each trade permit that applies, electrical, plumbing, and mechanical, is charged at $0.01 per square foot with a $45 minimum fee each.
For a 200 square foot kitchen, the building permit math is $96, plus $45 plan review, plus $45 each for the electrical and plumbing minimums, for a total of about $231. Add a mechanical permit at its $45 minimum, for example when ductwork moves, and the total is about $276. Plano also lists simple trade permits at $85 each for residential work, a reinspection fee schedule that starts at $75 for a first reinspection, and a plan review deposit of 65 percent of the building permit fee that is applied to the total and is nonrefundable. Because the per square foot building charge is so low, the flat minimums do most of the work in Plano, and a small kitchen and a mid sized kitchen land close together in total fees. See our guide to the best kitchen remodelers in Plano for local contractor comparisons.
How much does a kitchen remodel permit cost in Dallas?
Dallas prices alterations and repairs by the value of the proposed work. Ordinance 33080, effective July 1, 2025, sets Table B-1 of the Dallas City Code fee chapter: the permit fee is the value of the work multiplied by a rate, 0.009652 times 1.33 for work valued between $2,001 and $25,000, with higher bands above that and a minimum permit fee of $175. The ordinance also sets a nonrefundable technology fee of $15 for each application or permit, and a trade inspection minimum fee schedule of $125 for one trade, $250 for two trades, $375 for three trades, and $125 more per trade after that.
On a $25,000 kitchen, the Table B-1 math gives about $321, plus the $15 technology fee, for about $336 before any trade inspection minimums that apply to the scope. On a $50,000 kitchen the fee rises with the valuation band, so Dallas rewards an accurate project valuation: overstating the value of the work raises the fee, and the city can reassess it. Dallas also exempts some kitchen work from a building permit altogether. The Dallas City Code list of work exempt from permit, cited in the DFW Remodeling Permit Guide published by UHS Remodeling and updated June 2026, includes cabinets, countertops, and similar finish work, and interior remodeling of nonload bearing components in a single family or duplex home that does not add floor area. Trade work is separate: moving plumbing or electrical lines is where a Dallas kitchen usually crosses into permit territory. Our guide to kitchen remodelers in Dallas covers the local market.
How much does a kitchen remodel permit cost in Houston?
Houston prices one and two family residential building permits by square footage and construction type, not by project cost. The City of Houston 2026 Building Code Enforcement Permit Fee Schedule, under Ordinance 2023-907 and effective January 1, 2026, sets a $33.56 administrative fee on every permit, a $91.06 minimum permit fee, and a nonrefundable plan review fee of 25 percent of the estimated building permit fee, charged when plans are submitted. The schedule prices residential repair, alteration, and remodel work at a share of the new construction fee for the home, and trade permits are priced per item: plumbing fixtures at $34.24 for the first one to three fixtures plus $11.41 for each additional fixture, and electrical work priced per outlet and fixture, with items such as a range receptacle at $4.70.
PermitCalculator, which builds its figures from Houston Public Works fee data and last verified its Houston data on September 27, 2026, puts a Houston kitchen remodel at $403.13 in permit fees, with electrical and plumbing permits in the stack. Treat that as the schedule applied to a standard kitchen, not a quote: a kitchen that adds a gas line, a panel upgrade, or structural work will price higher, and each separate permit carries its own $33.56 administrative fee. Houston updates its fee amounts every January 1 under its ordinance, so a project filed in a new year prices on the new schedule. Homeowners planning work in the area can start with our guide to the best kitchen remodelers in Houston.
How much does a kitchen remodel permit cost in Phoenix?
Phoenix prices building permits by project valuation under Table A of the Planning and Development Department fee schedule, approved December 17, 2025 and effective January 20, 2026 under Ordinance G-7465. Table A charges a $195 base fee for work valued at $1 to $1,000, then $195 plus $12 for each additional $1,000 of value up to $10,000, then $303 plus $10 for each additional $1,000 up to $50,000, then $703 plus $9 for each additional $1,000 up to $200,000. Valuation includes materials, labor, overhead, and profit, and the city uses the higher of its own calculated valuation or the value the applicant declares.
The line that surprises Phoenix homeowners is plan review. For residential projects valued at $50,000 or less, general plan review costs 100 percent of the permit fee, with a $195 minimum. Above $50,000 it costs 80 percent. So a kitchen valued at $30,000 carries a permit fee of $503, which is $303 plus 20 times $10, and a plan review fee of the same $503, for about $1,006 before any separate system charges or a plot plan review where one applies. The city's own worked example in the schedule shows the same structure at a larger scale. Reinspection fees run $195 each for inspections called before work is ready or where access is not available. Phoenix lands second highest on this list almost entirely because of the full plan review charge, so it is the city where confirming the valuation on your application matters most. Our guide to the best kitchen remodelers in Phoenix covers local pros and project norms.
How do permit fees fit into a total kitchen budget?
In all five cities, permit fees are a small line next to the project itself. Our kitchen renovation cost guide tracks full project budgets, and against a $25,000 to $50,000 kitchen, even the Austin and Phoenix stacks stay near 2 to 4 percent of the job. The bigger financial risk is not the fee. It is unpermitted work: an investigation fee, a stop work order, or a resale disclosure problem costs far more than the permit would have. Houston, for example, sets its investigation fee for unpermitted construction at a $333.42 minimum or double the permit fee, whichever is greater, on its 2026 schedule.
Budget the full sequence, not just the permit. Demolition usually comes first, and our kitchen demolition and disposal cost guide prices that stage. Island work often drives the electrical and plumbing scope that triggers trade permits, and our kitchen island cost guide shows how. Browse the full kitchen remodeling category for the rest of the cost cluster.
Two habits keep permit costs predictable in any of these cities. First, fix the scope before you file, because revisions and extra review cycles add fees in Austin, Plano, and Phoenix alike. Second, let the contractor pull the permit in their own name where the city allows it, so the inspection record sits with the party doing the work. Fee schedules were read in full for this page in November 2026 from the City of Austin, the City of Plano, the City of Dallas, the Houston Permitting Center, and the City of Phoenix. Schedules change, and the permit office's figure at intake is the one that counts.
Frequently asked questions
Which city has the cheapest kitchen remodel permit?
Plano, on the schedules read for this page. Plano charges $0.48 per square foot for residential alterations with a $40 minimum, plus a $45 plan review fee and trade minimums of $45 each, so a 200 square foot kitchen lands at about $231 to $276 in total city fees under the schedule effective January 2, 2026.
Why is a kitchen permit so much more expensive in Austin and Phoenix?
Structure, not the kitchen. Phoenix adds a plan review fee equal to 100 percent of the permit fee on residential projects valued at $50,000 or less, which doubles the bill. Austin stacks a square foot plan review fee, a $136.45 application processing fee, a building fee, and a separate fee for each trade the project touches.
Do I need a permit to replace cabinets and countertops only?
Often not, but it depends on the city and on what else changes. Dallas lists cabinets, countertops, and similar finish work as exempt from a building permit, and Plano treats cosmetic cabinet swaps as exempt in its permit guidance. The moment the project moves plumbing, adds circuits, or changes structure, a permit is usually required. Our kitchen remodel permits guide walks through the triggers city by city.
Are permit fees based on what my contractor charges me?
In Dallas and Phoenix, yes, valuation drives the fee, and both cities can substitute their own valuation if it is higher than the declared one. Austin prices plan review by square foot, Plano prices alterations by square foot, and Houston prices residential work by square foot and construction type, so in those three cities the contract price matters less than the size of the kitchen.
Who pays the permit fee, the homeowner or the contractor?
The homeowner ultimately pays, either as a line on the contract or as a pass through cost. Contractors usually pull the permit and pay the city at issuance, then bill it as part of the project. Get the permit fee shown as its own line in the written bid so you can check it against the city schedule for your city on this page.