Kitchen Countertop Cost Guide (2026): What You Will Pay Per Square Foot
Replacing kitchen countertops costs about $3,000 on average in 2026, according to Fixr, with most homeowners paying between $1,400 and $5,250 for standard materials. That average assumes a typical kitchen of about 35 square feet and quartz, the most common countertop material. Your own price depends on the material you pick, how many square feet you need, and what your quote leaves out. These are national published ranges, not quotes: Rebuilt Kitchen Pros holds no price figures of its own. They tell you whether a bid is in the normal band or an outlier. They do not replace a written quote from a fabricator who has measured your kitchen.
How much do kitchen countertops cost in 2026?
Angi's 2026 data puts the average a little higher, at about $3,200, with most projects between roughly $1,900 and $4,500, according to Stonify's 2026 cost overview. Laminate jobs can come in under $1,000. Premium quartzite or stainless steel can reach $8,000 to $9,000. The material is the single biggest driver of the total.
How much do countertops cost per square foot by material?
Fabricators price countertops by the square foot of finished top. An installed price normally bundles the slab, cutting and polishing, a standard edge, and installation. The table uses Fixr's 2026 installed price bands.
| Material | Installed cost per square foot (Fixr, 2026) |
|---|---|
| Laminate | $15 to $60 |
| Butcher block | $40 to $100 |
| Solid surface (Corian) | $40 to $100 |
| Granite | $40 to $150 |
| Quartz | $50 to $200 and up |
| Marble | $50 to $200 |
| Quartzite | $60 to $200 |
HomeGuide and Stonify publish similar 2026 bands: countertops overall at $50 to $150 per square foot installed, granite typically $80 to $150, and quartz $50 to $200.
Quartz is the material most kitchens get, and Fixr puts it at an average of $88 per square foot installed: entry quartz $50 to $70, mid-range quartz $60 to $120, and premium quartz $90 to $200, per RemodelCalculators' 2026 data. Granite starts cheaper, with entry colors like Uba Tuba or Santa Cecilia at $40 to $60 installed, while premium and exotic granite reaches $120 to $200 or more. At the bottom granite costs less than quartz. In the middle they cost about the same.
How much does a countertop cost for a 10x10 kitchen?
A typical 10x10 galley or L-shaped kitchen has about 40 square feet of countertop. At $40 to $150 per square foot, replacement usually runs $1,600 to $6,000, per Fixr. Smaller jobs scale down the same way: 10 square feet runs $400 to $1,500, 20 runs $800 to $3,000, and 30 runs $1,200 to $4,500. Stonify's worked example puts a 40 square foot kitchen at about $2,000 in entry granite, $3,200 in mid-range quartz, and $5,600 in premium quartzite.
If you are planning a full remodel, the countertop is one line in a bigger budget. Our kitchen remodel cost by size guide shows how the total changes by kitchen size, and the kitchen renovation cost guide and estimator walks through building a scope-based budget from local bids.
What else is in the quote besides the slab?
The per-square-foot price is only part of what you pay. In Stonify's worked example, the extras together added about $1,000 no matter which stone was picked. Labor usually makes up 15 to 30 percent of the total, and installation alone runs $450 to $900 for an average kitchen, per Fixr, often including delivery. Removing old countertops adds $50 to $300. Extra cutouts run $100 to $200 each. Plumbing disconnect and reconnect runs $150 to $400. A new backsplash runs $500 to $1,500.
Edge profiles add up by the linear foot. An eased edge is usually included at no extra cost. Beveled and bullnose edges add $10 to $15 per linear foot. Mitered and ogee profiles add $20 to $25, and a Dupont edge adds $20 to $40, per Fixr.
Before you sign, check what the quote includes: templating, edge, each cutout, backsplash, seams, delivery, installation, tear-out, and sealing. Add the price of anything left out, then divide each adjusted total by the square footage.
Why do quotes for the same kitchen differ so much?
Quotes for the same kitchen commonly differ by 20 to 40 percent within one market, according to Stonify. Most of that gap comes from scope. One quote includes tear-out, the sink cutout, templating, and the backsplash. Another leaves them out. The product matters too: white quartz can mean a $15 per square foot builder color or a $50 designer slab, and one shop may quote 2cm stone while another quotes 3cm. Shops also measure differently. Most charge the full rectangle and do not subtract the sink hole, so a 33 by 22 inch sink cutout adds about $400 at $80 per square foot.
A quote 10 to 15 percent below the market can come from an efficient shop. A quote 35 to 40 percent below every other bid is almost always missing something: a lower grade of stone, thinner material, a short measurement, excluded items, or no insurance. Ask each shop where the seams will go, who installs, and what the warranty covers, and get the answers in writing.
How can I lower my countertop cost without cutting corners?
Start with the material. Laminate, acrylic, or travertine cut the upfront cost the most, and entry-level granite in a common color is the cheapest stone. Keep the edge simple: an eased edge costs nothing extra, while decorative profiles can add hundreds. A $45 granite is as hard and heat resistant as a $150 granite; you pay for scarcity and looks, not performance, per Stonify.
Consider resurfacing before replacing: if your counters are chipped or faded, a professional resurface can cost far less. Get at least three written estimates on the same scope, with the same material, brand, color, thickness, and finish named in each.
Our kitchen countertop materials compared guide covers how each material holds up day to day, and the kitchen cabinet refacing cost guide covers the other big-ticket item often priced alongside counters.
How do I get accurate local bids?
National price bands tell you what is normal. A local bid tells you what you will pay. Get three written quotes from fabricators who have measured your kitchen, each naming the exact material, brand, color, thickness, and finish, the square footage used, and every included item. Compare adjusted totals per square foot, not headline numbers.
Rebuilt Kitchen Pros lists 207 kitchen remodeling professionals, with 198 active listings. The largest labeled service areas are Plano with 13 pros, Austin with 12, Houston with 10, Phoenix with 9, Bellevue and the Dallas Fort Worth area with 7 each, and Atlanta with 6. Our best kitchen remodelers in Plano guide shows what a real comparison looks like. Ask each pro to build the bid from your scope, not from a national average.
Frequently asked questions
How much do kitchen countertops cost in 2026?
About $3,000 on average, according to Fixr, with most homeowners paying between $1,400 and $5,250. Laminate jobs can come in under $1,000; premium quartzite or stainless steel can reach $8,000 to $9,000.
How much do countertops cost per square foot?
Installed prices run $15 to $60 per square foot for laminate, $40 to $150 for granite, $50 to $200 and up for quartz, $50 to $200 for marble, and $60 to $200 for quartzite, per Fixr.
How much does a countertop cost for a 10x10 kitchen?
A typical 10x10 kitchen has about 40 square feet of countertop, so replacement usually runs $1,600 to $6,000 at $40 to $150 per square foot, per Fixr.
Is quartz or granite cheaper in 2026?
Granite is cheaper at the bottom, with entry colors at $40 to $60 per square foot installed. In the middle they cost about the same. Quartz averages about $88 per square foot installed, per Fixr.
What extras should I budget for beyond the per-square-foot price?
Plan for tear-out at $50 to $300, cutouts at $100 to $200 each, plumbing reconnect at $150 to $400, a backsplash at $500 to $1,500, and edge upgrades at $10 to $40 per linear foot. Together they often add about $1,000.
Why do countertop quotes for the same kitchen differ so much?
Quotes commonly differ by 20 to 40 percent because of scope, product grade, measuring method, and what each quote includes. Put every quote on the same basis and compare the adjusted totals per square foot.